HOW TO.....

HOW TO..... Videos, Diagrams and instructions for installing, fitting or changing your water filter or water filter cartridges.

How To Change a Water Filter

Along with EPDWA (European Point of Use Drinking Water Association) we Recommend that All drinking water filters are changed every 6 months:

Point 6 in the EPDWA operating guidelines:

” The epdwa guidelines state that all pou filters are changed once every 6 months (+/- 10%), irrespective of some manufacturers claiming a longer life. This is to avoid the build up of bacteria inside the filter.”

 Please Click on the link below to watch a video showing you:

 VIDEO:How To Change Your Drinking Water Filter

 Or Follow The Instructions here:

How To Change Your Water Filter:

 Pureflo Filter Change:

 Shut the filter valve or turn off The MAINS and open the drinking faucet.Unscrew the body, which will be full of water, from the head. The candle can now be pulled out from the head and replaced with a new one. Do Not touch the new Candle, use the protective wrapping to push it in, then remove the wrapping. (This is to avoid contamination). The housing can be washed with dishwashing soaps followed by a thorough rinse. Lubricate sump “O” ring with vegetable oil or Vaseline before screw-in the sump. Repeat the same process for the 2nd filter.

If normal use of the filter is interrupted by holidays or vacations, the first quart/liter of water may have “flat” or “stale” taste.Flushingthe system for several minutes after any prolonged period of inactivity will eliminate this problem.

DOULTON WATER FILTER:

SERVICING THE WATER FILTER : Replacement of the Supercarb candle is carried out as follows:

Shut the filter valve or turn off the MAINS water and open the drinking faucet. Unscrew the body, which will be full of water, from the head. The candle can now be unscrewed (as if unscrewing a light bulb) from the head and replaced with a new one. Do Not touch the new Candle, use the protective wrapping to screw it in, then remove the wrapping. (This is to avoid contamination). The housing can be washed with dishwashing soaps followed by a thorough rinse. Lubricate sump “O” ring with vegetable oil or Vaseline before screw-in the sump.

If normal use of the filter is interrupted by holidays or vacations, the first quart/liter of water may have “flat” or “stale” taste. Flushing the system for several minutes after any prolonged period of inactivity will eliminate this problem.

 

 

Price: €0.00

Shipping:€0.00

Loading Updating cart…

How to Install Double PUREFLO Water Filter

For the Double system :Be sure to Follow the above diagram.

This Video shows you how to install a Pureflo water filter:

Click : How To Install Pureflo Water Filter to see a video on Installing a single drinking water filter. For the dual system follow the same instructions, then do the same again.

The installation is different for Spain as we do not have copper piping. Please read below for Spanish installation or contact us for more information.

1. Find the cold water line beneath the sink.
2. Shut off cold water supply by turning the cold water shut-off clockwise. This is
usually under the sink, but can be at another location.
3. Open a faucet to  verify that the water has been shut off.
4. After verifying that the water is shut off, unscrew the flexi hose under the sink.
5.Attach the Tee piece between the flexi hose and the cold water supply.
And then continue as per the video.

Price: €0.00

Shipping:€0.00

Loading Updating cart…

How to Install a Water Filter

This Video shows you how to install a Pureflo water filter:

Click : How To Install Pureflo Water Filter to see a video on Installing a single drinking water filter.

The installation is different for Spain as we do not have copper piping. Please read below for Spanish installation or contact us for more information.

Click  here for instructions with photos:

Fitting instructions in english with Pics

Instalacion en EspaNol con fotos

 

Fitting Instructions:

 

  1. Locate chrome tap around the back edge of the sink, ensuring the end of tap is over the sink.
  2. Drill 12mm hole in chosen location, (Drill a pilot hole with a 6mm drill bit, then follow with a 12mm drill bit) install and secure chrome tap.
  3. Turn off cold water supply. Disconnect flexi hose from cold tap at the stop cock end. Fit the connection valve to the stopcock then reconnect flexi hose to the outlet on the connection valve.
  4. Locate and install filter kit on the side of the sink base unit.
  5. Push blue tube into input end of filter head and blue tube into output end of the filter head. These fittings are self sealing: Test by trying to gently pull the pipe away from the fitting.
  6. Turn cold water supply back on and Open chrome tap on the sink.
  7. Before use run the chrome tap for 30 seconds to flush the system. There may be some bubbles but this is just air which will settle. For best performance always run until “chill to touch”.


  

 

Price: €0.00

Shipping:€0.00

Loading Updating cart…
A Wordpress Shopping Cart Site